 |
|
|
| Home > Products > Cameras > Armored IR PTZ Camera > Specifications |
| Technical Specs | WCA-E261 |
| Signal Format | NTSC/PAL |
| Image Sensor | Sony 1/4" Super HAD CCD |
| Effective Pixels | 680K |
| Horizontal Resolution | 480 TV Lines |
| Scanning System | 2:1 Interlace |
| Video Output Level | 140IRE, 75 ohm |
| Video Output Jack | BNC |
| Minimum Illumination |
Color: 2.0 Lux (Typical), B/W: 0.05 Lux (Manual Control) |
| Built-in IR LED |
45ea, 850nm output, Up to 170ft at night |
| Gamma Characteristics | 0.45 |
| S/N Ratio | 50dB |
| Integrated Lens | 26x Zoom, f=3.5mm(wide) to 91.0mm(tele), F1.6 to F3.8 |
| Panning System |
Angle: 0° to 360° (endless) Manual Speed: More than 100°/sec Preset Speed: More than 110°/sec |
| Tilting System |
Angle: -20° to 90° Manual Speed: More than 60°/sec |
| Auto Swing | Max. 4 Pan Swing (2 position swing) |
| Preset | Up to 63 positions |
| Guard Tour | Up to 8 guard tours, consisting of 63 presets and functions |
| ID (Camera Address) | 0 to 255 |
| Control | RS-485/RS-422C, baud rate: 2400/115200bps |
| Construction |
Die-cast Aluminum & O-ring sealed (All internal parts are corrosion protecting epoxy powder coated.) |
| OSD (On Screen Display) | Camera ID, Camera Name, Area Name, & Preset Number |
| Power Requirement | DC12V - DV18V (50/60Hz) |
| Power Consumption | Max. 12VDC/3A |
| Operating Temperature | -40oF ~ 131oF (-40oC ~ 55oC) |
| Operating Humidity | 30 to 90% RH (Non-condensing) |
| Dimensions(Diameter x Height) | 138 x 205.81mm (5.43 x 8.10 Inch) |
| Body Color | Black |
| Net Weight | 6.60 Lbs |
| Certification | CE, FCC |