|
-
Aluminum Construction,
Gray polyester powder coat finish.
-
Good for Indoor & Outdoor.
-
Cylinder Outside Dimensions:
4.25 inch in Diameter
12 inch in Length
-
The housing is attached to the tilt table of the mount with the two (2) 1/4-20 x 1/2-inch screws (provided).
|
|
-
Adjustable Head for Positioning of the Enclosure:
Pan Adjustment 360°
Tilt Adjustment ±75°
-
Suggested Mounting Method: Secure to wall with three 1/4-inch diameter
fasteners (not supplied), or use one 5/16-inch
diameter and one 1/4-inch diameter fastener
for center mount holes in applications where
wall studs are encountered.
-
Can be adapted for Pole Mount Applications with use of Pole Mount Adapter (#PA101).
-
Optional Ceiling Mount (J Mount) available, call for replacement and price difference.
|
|
-
The model features a sled for camera mounting.
-
Cable entry is through two adjustable cable glands located on the rear plate.
|
|
-
Pre-installed, outdoor-rated 4ft cable leads
-
Power cable: UL Marked, direct burial & sunlight resistant, stripped & tinned, 18AWG x 2 for 24VAC input (24VAC 20VA or higher recommended for the T22 series)
-
Video cable: High quality RG59/U 75 ohm coaxial cable for 1Vp-p video output (molded BNC male connector with BNC female adapter attached).
|
