|
-
Industrial-grade Aluminum Construction.
-
Designed to NEMA-3R, IP55.
-
Compact & attractive for indoor or
outdoor use.
-
Window: 3mm thick UV stabilized polycarbonate.
-
Suitable for all weather conditions(-40° F ~ 122°F).
-
Dimensions: 4.3" Ø, 16.5" Long
-
The housing is attached to the tilt table of the mount with the two (2) 1/4-20 x 1/2-inch screws (provided).
|
|
-
Feed through wall mount supplied (Optional
Pole Mount Adapter available).
-
Adjustable Mounting Head: 360° pan, 180° tilt.
-
The mount has four 5/16" mounting holes. Mounting
hardware (not supplied) depends on the wall material. Each fastener
must have a minimum pull-out strength of at least
450 lb.
-
Optional Ceiling Mount (J Mount) available, call for replacement and price difference.
|
|
-
Built-in Heater & Blower.
-
Max. power consumption: 24VAC, 18W (including power for the camera).
-
Slide-off cover provides full accessibility to
camera for quick installation and service.
-
Cable entry is through two adjustable cable glands located on the rear plate.
|
|
-
Pre-installed, outdoor-rated 4ft cable leads
-
Power cable: UL Marked, direct burial & sunlight resistant, stripped & tinned, 18AWG x 2 for 24VAC input (24VAC 20VA or higher recommended for the T24 series)
-
Video cable: High quality RG59/U 75 ohm coaxial cable for 1Vp-p video output (molded BNC male connector with BNC female adapter attached).
|
