|
-
Weather resistant Aluminum construction.
-
For outdoor & tough indoor environment.
-
Housing's Outside Dimensions: 14.7x5.5x4.5"
-
The housing is attached to the tilt table of the mount with the two (2) 1/4-20 x 1/2-inch screws (supplied).
-
Built-in Heater & Blower,
- Heater is on at +59°F, off at +77°F
- Blower is on at +105°F, off at +86°F
|
|
-
Adjustable Head Positioning: 360° Pan, 90° Tilt.
-
The mount base has four 1/4-inch diameter holes. Mounting hardware supplied, but it may not be good for the wall you want to install the housing kit.
It is recommended to use proper fasteners depending on the material of the wall.
-
Optional Ceiling Mount (J Mount) available, call for replacement and price difference.
|
|
-
Flip open type.
-
1/2" cable access hole at rear base.
|
|
-
Pre-installed, outdoor-rated 4ft cable leads
-
Power cable: UL Marked, direct burial & sunlight resistant, stripped & tinned, 18AWG x 2 for 24VAC input (24VAC 20VA or higher recommended for the T34 series)
-
Video cable: High quality RG59/U 75 ohm coaxial cable for 1Vp-p video output (molded BNC male connector with BNC female adapter attached).
|
